Integrated as One System. Backed by Hanwha Qcells.
Lower total cost of ownership, faster deployment, and greater ITC certainty with Qcells OmniSkid™.
Domestic Content & Tax Credit Eligibility
OmniSkid contains U.S. manufactured components and non-prohibited foreign entity (non-PFE) content which can contribute to qualifying for the additional 10% domestic content bonus for applicable (ITC) investment tax credits.*
*This statement should not be relied on as tax advice and is subject to change based on changes made to the applicable rules and regulations. Please consult a qualified tax professional for specific guidance.
A Flexible Solution for Distribution & Transmission Grids
Community Storage
OmniSkid is sized to stabilize local grids, balance renewable generation, and deliver more affordable, predictable energy to communities served.
Large Commercial & Industrial
Leverage behind-the-meter applications like peak shaving, grid services, microgrid backup, and greater facility uptime with OmniSkid.
Utility Scale
Utilities can utilize OmniSkid to strengthen grid reliability, integrate renewables, defer upgrades, and unlock new revenue streams.
Built-In Performance
Every system is delivered as a fully integrated energy storage platform, backed by a single warranty.
Nameplate energy
Round-trip efficiency
Duration
Full cycles
Battery lifecycle
One Integrated System. One Warranty.
Available in AC & DC Coupled Configurations
- Supports stand-alone storage and solar-plus-storage applications.
- Multiple value streams: Energy arbitrage, peak shaving, frequency response, capacity firming, and microgrid resilience
- Retrofit-ready: Add storage without modifying existing generation equipment.
Product Highlights
Nameplate Energy:
4.99 MWh
Duration:
4-hour configuration
AC Inverter Power:
1-1.5 MW
Output Voltage:
600V AC
- Supports BESS inverter and PV inverter architectures at the POI.
- Flexible charging: Charge from on-site solar, the grid, or both to optimize energy value & operating economics.
- Expanded value streams: Capture clipping energy, energy shifting, and curtailment recovery.
Product Highlights
Nameplate Energy:
4.99 MWh
Duration:
4 hours
DC Converter Power:
1-2 MW
Output Voltage:
1500V DC
Controls
Engineered for secure, interoperable system control.
Integrated system coordination
EdgeLynx™ manages battery, PCS, and balance-of-system equipment as a unified platform, ensuring reliable operation and coordinated protection across all devices.
Seamless third-party integration
EdgeLynx controllers support IEEE 1815.2 (MESA-DER), DNP3, and SunSpec Modbus protocols, enabling straightforward integration with third-party PPC, EMS, and SCADA systems.
Built-in warranty data management
Qcells handles warranty data collection, storage, and historization automatically, simplifying compliance, reporting, and long-term asset management.
Designed for cybersecurity
NERC CIP-aligned cybersecurity architecture helps protect critical infrastructure utilizing DER-centric machine learning for early threat detection.
Certified at every level of the system
From individual cells to the complete installation, each component is tested against the standards that matter.
Select a component to see what it is certified to:
System
Complete installed energy storage system
- UL 9540Safety standard for energy storage systems and equipment, evaluating the complete system as installed.
Certification list reflects the product documentation. Standard descriptions are summaries.
Select a component to see what it is certified to:
Battery
System, cells and modules
- UL 1973Safety of batteries used in stationary energy storage applications.
- UL 9540ATest method for evaluating thermal runaway fire propagation.
- UL 1642Safety of lithium batteries and cells.
- UN 38.3Required testing for safe transport of lithium batteries.
- NFPA 855 (2026)Fire code for installing stationary energy storage systems.
- HMAHazard Mitigation Analysis of fire and safety risks for the installation.
Certification list reflects the product documentation. Standard descriptions are summaries.
Select a component to see what it is certified to:
Edgelynx Controller
Controller and energy management
- UL 508ASafety of industrial control panels.
- UL 62368-1 / CSA C22.2 No. 62368-1-14Safety of electronic and communications equipment.
- EN IEC 61000-6-2:2019Electromagnetic immunity for industrial environments.
- IEEE 1547.3-2023Guide to cybersecurity for distributed energy resources interconnected with electric power systems.
- NERC-CIPCritical Infrastructure Protection reliability standards.
Certification list reflects the product documentation. Standard descriptions are summaries.
Select a component to see what it is certified to:
PCS
Power conversion system
- UL 1741, Edition 3Safety of inverters, converters and controllers for distributed energy resources.
- IEEE 1547-2018Requirements for interconnecting distributed resources with the grid.
- CSA C22.2 No. 107.1-16Safety of general use power supplies.
- FCC Part 15 Subpart BLimits on unintentional radio-frequency emissions.
- CA Rule 21California grid interconnection requirements.
- Hawaii Rule 14Hawaii grid interconnection requirements.
- AS 4777.2Australian grid-connection standard for inverters.
Certification list reflects the product documentation. Standard descriptions are summaries.
Software & Safety
GridBidder™ Dispatch Optimization
Geli GridBidder™ uses market- and tariff-specific optimization algorithms to autonomously dispatch the energy storage system based on real-time operating conditions, maximizing revenue generation, demand charge reduction, and energy cost savings. Available for a broad range of behind-the-meter and select front-of-meter programs.
EdgeLynx™ Power Plant Controller (PPC)
For front-of-meter deployments, the EdgeLynx Power Plant Controller enables direct dispatch through utility, DERMS, or third-party scheduling platforms using Automatic Generation Control (AGC) communications. Site-specific PPC configurations support project operational requirements, grid compliance, and interconnection obligations.
3rd Party Integration Architecture
OmniSkid’s EdgeLynx™ unit-level controllers support IEEE 1815.2 (MESA-DER), DNP3, and SunSpec Modbus protocols via industry standard data mapping, enabling seamless integration with third-party PPC, EMS, and SCADA platforms while preserving operational visibility and control.
Lifecycle Services & Support
From project development through operations, Qcells provides support across every stage of the project lifecycle.
Pre-Sales Support
Project Modeling
Digital twin modeling
Requirements Analysis
Application & use case review
Preliminary System Design
Technical solution development
Project Quotes
Performance and pricing proposal
Commissioning & Project Management
Design Review
Preliminary engineering validation
Deployment Kickoff
Project launch coordination
Shipping & Scheduling
Delivery planning and tracking
Commissioning Support
FAT & SAT start-up support
Operations & Asset Management
Warranty Services
Preventive maintenance programs
Performance Reporting
KPI monitoring and reporting support
Technical Support
Dedicated 24/7 response support
NOC Services
Monitoring and operational oversight